SSBMADEEASY: EKT Question Paper

Browsing "Older Posts"

Browsing Category "EKT Question Paper"

Previous Question Paper for EKT Exam for Electrical and Electronics Engineering

Guys this is sample question paper for EKT exam for Electrical and Electronics engineering you can use this as a

EKT Question Paper Set for Electrical and Electronics

practice set, Questions asked in exam are not too tough regardless you know the basics of your field, just read out the maths basics: work on your aptitude well and prepare for your technical knowledge. luck also matters here as questions are objective base but don't try to attempt more questions by luck because negative marking is also there. Go and purchase a book from market for its preparation if you are serious enough, personally experienced that preparation portal don't have much info about EKT exams so its better to practice from a book.

I have provided a post regarding:

Complete overview, Purpose and Preparation Tips for EKT Exam please read it also.

Q1. If sin x+(sin x) ² =1, then

(a) cos x+(cos x) 2 =1

(b) cos x - (cos x) 2 =1

(d) (cos x) 2 + (cos x) 4 =1

Q2. Each edge of a cube is increased by 50%. The percentage increase in the surface area is
(a) 50
(b) 125
(c) 150
(d) 300

Q3. The value of log 4 + log 5 - log 2 is
(a) 1
(b) 7
(c) 10
(d) 9/2

Q4. The probability of drawing an ace or a spade or both from a deck of cards is
(a) 4/52
(b) 13/52
(c) 1/52
(d) 16/52

Q5. Let 0 be the angle between two vectors a and b, then cos 0 is equal to
(a) mod a + mod b
(b) (a )+ mod b
(c) mod (a+b)
(d) ab/[ mod a x mod b]

Q6. Pressure is
(a) scalar
(b) vector
(c) pseudo vector
(d) Poynting vector

Q7. The force of attraction or repulsion between charges follows
(a) square law
(b) inverse square law
(c) both (a) and (b)
(d) none of (a) and (b)

Q8. The force experienced by a conductor of length L carrying current I placed parallel to the magnetic field of flux density B is
(a) BIL
(b) Zero
(c) HIL
(d) IL/B

Q9. A wave undergoes reflection from a rigid boundary. One of its characteristic parameters that changes is
(a) frequency
(b) phase
(c) velocity
(d) wavelength

Q10. The half-life period of a radioactive element is 140 days . After 560 days one gram of the element will reduce to
(a) 1/2 g
(b) 1/4 g
(c) 1/8 g
(d) 1/16 g

Q11. Which projection shows the object from angles in which the scales along each axis of object are equal
(a) auxiliary projection
(b) isometric projection
(c) orthographic projection
(d) objective projection

Q12. A charge of 2 coulombs every 0.5 sec signifies
(a) 4 A of current
(b) 1A of current
(c) 2A of current
(d) none of these

Q13. Transformer is a device used for
(a) converting AC to DC
(b) for stepping down AC Voltages
(c) both stepping up/down AC Voltages
(d) only stepping up AC Voltages

Q14. In order to get back the original signal from sampled signal , It is necessary to use
(a) low pass filter
(b) high pass filter
(c) band pass filter
(d) band reject filter

Q15. Superposition theorem can be applied only to circuits having elements
(a) non-linear
(b) passive
(c) linear bilateral
(d) resistive

Q16. Negative feedback reduces in amplifiers
(a) signal
(b) amplification
(c) distortion
(d) none of the above

Q17. Whenever the two inputs are same the output is high for
(a) EX-OR
(b) EX-NOR
(c) NOR
(d) NAND

Q18. In digital Electronics a nibble is a collection of
(a) 4 bits
(b) 2 bits
(c) 8 bits
(d) 10 bits

Q19. If both R=1 and S=1 in RS Flip Flop then Q is
(a) last value
(b) set
(c) reset
(d) forbidden

Q20. Ideal OP Amp's input resistance Is
(a) zero
(b) 100 k ohms
(c) Infinite
(d) 15 k ohm

Q21. A hard disk is divided into tracks which are further subdivided into
(a) clusters
(b) sectors
(c) vectors
(d) heads

Q22. Pentavalent impurities gives rise to more number of
(a) electrons in valence band
(b) electrons in conduction band
(c) holes in valence band
(d) holes in conduction band

Q23. A Varactor diode may be advantageous at microwave frequencies
(a) for electronic tuning
(b) as an oscillator
(c) as a parametric amplifier
(d) for frequency multiplication

Q24. When used in a circuit , a zener diode is always
(a) forward biased
(b) connected in series
(c) troubled by overheating
(d) reverse biased

Q25. The output from a laser is monochromatic , this means that it is
(a) infrared
(b) polarised
(c) narrow beam
(d) single frequency

Q26. In pneumatic control system, compensation is provided by
(a) bimetallic strip
(b) extension tube
(c) restriction volume tube
(d) none of the above

Q27. The main drawback of a feedback system is
(a) large time delay
(b) inefficiency
(c) inaccuracy
(d) unreliability

Q28. In an open loop control system
(a) control action is independent of the output
(b) control action depends upon human judgment
(c) internal system changes are automatically taken care of
(d) both (a) and (b)

Q29. Which of the following cannot be used to measure temperature
(a) thermocouple
(b) thermistor
(c) pyrometer
(d) thyristor

Q30. Poles are the complex frequencies of a transfer function where the response becomes
(a) infinite
(b) zero
(c) oscillatory
(d) decaying

Q31. The impulse response of an R-L circuit is a
(a) rising exponential function
(b) decaying exponential function
(c) step function
(d) parabolic function

Q32. The conversion of a signal representation from time domain to frequency domain is given by
(a) Fourier transform
(b) Shannon transform
(c) inverse Fourier transform
(d) inverse Laplace transform

Q33. The sampling theorem states that for a band limited signal of max frequency component fm
(a) fs>=2fm
(b) fs<=2fm
(c) fs<=2fm
(d) fs=fm

Q34. Voice signal frequency may lie anywhere between
(a) 0 to 20 KHz
(b) 0 to 1 MHz
(c) 15 Hz to 15 KHz
(d) none of these

Q35. Higher beamwidth of antenna implies
(a) higher directivity
(b) lesser directivity
(c) higher bandwidth
(d) lower bandwidth

Q36. PWM signal can be generated by
(a) a monostable multivibrator
(b) an astable multivibrator
(c) integrating PPM signal
(d) differentiating PPM signal

Q37. In broadcast receiver most of the selectivity is achieved in
(a) IF section
(b) RF section
(c) audio stage
(d) mixer

Q38. The IF bandwidth of a radar receiver is inversely proportional to the
(a) pulse width
(b) PRF
(c) pulse Interval
(d) square root of peak transmitted power

Q39. Quantizing noise occurs in
(a) TDM
(b) FDM
(c) PCM
(d) PWM

Q40. In order to separate channels in a FDM receiver it is necessary to use
(a) AND gates
(b) OR gates
(c) integration
(d) band pass filter

Q41. The physical layer, in reference to the OSI model, defines
(a) data link procedures that provide for the exchange of data via frames that can be sent and received
(b) the interface between the X.25 network and packet mode device
(c) the virtual circuit interface to packet-switched service
(d) all of the above

Q42. Which of the following device copies electrical signals from one Ethernet to another?
(a) bridge
(b) repeater
(c) hub
(d) passive hub

Q43. Which of the following TCP/IP protocol is used for transferring files from one machine to another?
(a) RARP
(b) ARP
(c) TCP
(d) FTP

Q44. What does the acronym ISDN stand for?
(a) Indian Standard Digital Network
(b) Integrated Services Digital Network
(c) Intelligent Services Digital Network
(d) Integrated Services Data Network

Q45. The following is measure of reproducibility in a measurement
(a) resolution
(b) drift
(c) precision
(d) fidelity

Q46. What part of the transformer is subjected to maximum heating
(a) core
(b) winding
(c) oil
(d) frame

Q47. The servo motor differs from ordinary motor in that it has
(a) low inertia & high torque
(b) high inertia & high torque
(c) low inertia & low torque
(d) high inertia & low torque

Q48. The speed of DC motor is
(a) always constant
(b) directly proportional to back emf
(c) directly proportional to flux
(d) inversely proportional to the product of back emf and flux

Q49. Which of the following DC generator cannot build up in an open circuit
(a) shunt
(b) series
(c) short shunt
(d) long shunt

Q50. The armature circuit resistance of DC generator is closest to
(a) 1 ohms
(b) 4n ohms
(c) 1000 ohms
(d) 20,000 ohms

Also check out

EKT syllabus for Electrical and Electronics Engineering

Tags: EKT Exam → EKT Question Paper

Previous Question Paper set for EKT exam of AFCAT: Electrical and Electronics Branch

By Deepak Tomar →

Model Question Paper for EKT Exam for Mechanical Branch

Guys this is sample question paper for EKT exam for mechanical branch you can use this as a

EKT sample Question Paper set for Mechanical

EKT model Question Paper for Mechanical

I have provided a post regarding:

Complete overview, Purpose and Preparation Tips for EKT Exam please read it also.

Q1. If sin x+(sin x) ² =1, then

(a) cos x+(cos x) 2 =1

(b) cos x - (cos x) 2 =1

(d) (cos x) 2 + (cos x) 4 =1

Q2. Each edge of a cube is increased by 50%. The percentage increase in the surface area is

(a) 50

(b) 125

(d) 300

Q3. The value of log 4 + log 5 - log 2 is

(a) 1

(b) 7

(d) 9/2

Q4. The probability of drawing an ace or a spade or both from a deck of cards is

(a) 4/52

(b) 13/52

(d) 16/52

Q5. Let 0 be the angle between two vectors a and b, then cos 0 is equal to

(a) mod a + mod b

(b) (a )+ mod b

(d) ab/[ mod a x mod b]

Q6. Pressure is

(a) scalar

(b) vector

(d) Poynting vector

Q7. The force of attraction or repulsion between charges follows

(a) square law

(b) inverse square law

(d) none of (a) and (b)

Q8. The force experienced by a conductor of length L carrying current I placed parallel to the magnetic field of flux density B is

(a) BIL

(b) Zero

(d) IL/B

Q9. A wave undergoes reflection from a rigid boundary. One of its characteristic parameters that changes is

(a) frequency

(b) phase

(d) wavelength

Q10. The half-life period of a radioactive element is 140 days. After 560 days one gram of the element will reduce to

(a) 1/2 g

(b) 1/4 g

(d) 1/16 g

Q11. Specify the sequence correctly

(a) grain growth, recrystallisation, stress relief

(b) stress relief, grain growth, recrystallisation

(d) grain growth, stress relief, recrystallisation

Q12. An eutectoid steel consists of

(a) wholly pearlite

(b) wholly austenite

(d) pearlite and cementite

Q13. Cast iron is a

(a) ductile material

(b) malleable material

(d) tough material

Q14. The percentage of carbon in cast iron varies from

(a) 0.1 to 0.5

(b) 0.5 to 1

(d) 1.7 to 4.5

Q15. The hardness of steel depends upon the

(a) amount of cementite it contains

(b) amount of carbon it contains

(d) method of manufacture of steel

Q16. Blast furnace is used to produce

(a) pig iron

(b) cast iron

(d) steel

Q17. For a constant volume process, work done is

(a) zero

(b) positive

(d) none of the above

Q18. Two balls of equal mass and of perfectly elastic material are lying on the floor. One of the balls with velocity v is made to strike the second ball. Both the balls after impact will move with a velocity

(a) V

(b) v/2

(d) v/8

Q19. The velocity ratio in case of an inclined plane inclined at angle 0 to the horizontal and weight being pulled up the inclined plane by vertical effort is

(a) sin 0

(b) cos 0

(d) cosec 0

Q20. Internal gears can be made by

(a) hobbing

(b) shaping with pinion cutter

(d) milling

Q21. Cast iron during machining produces

(a) continuous chips

(b) discontinuous chips

(d) none of these

Q22. In ideal machines, mechanical advantage is velocity ratio.

(a) equal to

(b) less than

(d) any of the above

Q23. Gantt chart is used for

(a) inventory control

(b) material handling

(d) machine repair schedules

Q24. The value of bulk modulus of a fluid is required to determine

(a) Reynold's number

(b) Froude's number

(d) Euler's number

Q25. In one dimensional flow, the flow

(a) is steady and uniform

(b) takes place in straight line

(d) takes place in one direction

Q26. In second type of levers,

(a) load is in between the fulcrum and effort

(b) effort is in between the fulcrum and load

(d) none of these

Q27. In a flange coupling, the flanges are coupled together by means of

(a) bolts and nuts

(b) studs

(d) none of these

Q28. A compound pipe of diameter d1, d2 and d3 having lengths l1, l2 and l3 is to be replaced by an equivalent pipe of uniform diameter d and of the same length (l) as that of the compound pipe. The size of the equivalent pipe is given by

(a) Z-5? + 57 + 57

(b) Z-5? + 57 + 57

dr-d? + d7 + d7

Q29. A systematic job improvement sequence will consist of

(a) motion study

(b) time study

(d) all of these

Q30. Euler's formula holds good only for

(a) short columns

(b) long columns

(d) weak columns

Q31. The object of caulking in a riveted joint is to make the joint

(a) free from corrosion

(b) stronger in tension

(d) leak-proof

Q32. Refrigeration works on

(a) Otto cycle

(b) Diesel cycle

(d) Reverse Carnot cycle

Q33. Compression members always tend to buckle in the direction of the

(a) axis of load

(b) perpendicular to the axis of load

(d) least radius of gyration

Q34. A thin spherical shell of diameter (d) and thickness (t) is subjected to an internal pressure (p). The stress in the shell material is

(a) pd/t

(b) pd/2t

(d) pd/8t

Q35. In a vibrating system, if the actual damping coefficient is 40 N/m/s and critical damping coefficient is 420 N/m/s, then logarithmic decrement is equal to

(a) 0.2

(b) 0.4

(d) 0.8

Q36. For high speed engines, the cam follower should move with

(a) uniform velocity

(b) simple harmonic motion

(d) cycloidal motion

Q37. If w/w„ is very high for a body vibrating under steady state vibrations, the phase angle for all values of damping factors, will tend to approach

(a) 0°

(b) 90°

(d) 360

Q38. When the relation between the controlling force (Fc) and radius of rotation (r) for a spring controlled governor is Fc = ar + b, then the governor will be

(a) stable

(b) unstable

(d) none of these

Q39. The maximum or minimum value of the swaying couple is

(a)

(a) — a( 1 — c)m o2 r

(b) — ( 1 — c)m o2r

Q40. The frictional torque transmitted in a flat pivot bearing with assumption of uniform pressure is as compared to uniform wear.

(a) Less

(b) more

(d) any of the above

Q41. A cycle consisting of one constant pressure, one constant volume and two isentropic processes is known as

(a) Carnot cycle

(b) Stirling cycle

(d) Diesel cycle

Q42. The compressed air may be used

(a) in gas turbine plants

(b) for operating pneumatic drills

(d) all of the above

Q43. The stagnation pressure rise in a centrifugal compressor takes place

(a) in the diffuser only

(b) in the impeller only

(d) in the inlet guide vanes only

Q44. In a jet propulsion

(a) the propulsive matter is ejected from within the propelled body

(b) the propulsive matter is caused to flow around the propelled body

(d) none of the above

Q45. Which of the following statement is wrong?

(a) In a two stage reciprocating air compressor with complete intercooling, maximum work is saved.

(b) The minimum work required for a two stage reciprocating air compressor is double the work required for each stage.

(c) The ratio of the volume of free air delivery per stroke to the swept volume of the piston is called volumetric efficiency.

(d) none of the above

Q46. Intercooling in multi-stage compressors is done

(a) to cool the air during compression

(b) to cool the air at delivery

(d) to minimise the work of compression

Q47. The ratio of work done per cycle to the stroke volume of the compressor is known

(a) compressor capacity

(b) compression ratio

(d) mean effective pressure

Q48. The accuracy of micrometers, calipers, dial indicators can be checked by a

(a) feeler gauge

(b) slip gauge

(d) plug gauge

Q49. Which resistive component is designed to be temperature sensitive?

(a) thermistor

(b) rheostat

(d) photoconductive cell

Q50. In oblique projection, important shapes should be in this position relative to the viewing plane:

(a) parallel

(b) perpendicular

(d) rotated

Also check out

EKT syllabus for Mechanical Engineering

Tags: EKT Exam → EKT Question Paper → EKT Syllabus

Sample Question Paper for EKT exam of AFCAT: Mechanical Engineering

By Deepak Tomar →